Lithium Battery Stacking Machine Lithium Cell Manufacturing Machinery

• Customization: Available
• Production Scope: Parts Production Line
• Automation: Automation
• Model NO.: JS-DPJ1520
• After-sales Service: Free Consults for Whole Life
• Transmission Type: Flexible
• Automatic Production Line: Assembly
• Certification: ISO, CE, SGS, TUV
• Flexible Production: Intelligent Manufacturing
• Rhythm: Flow Production Line
• Warranty: Free Consult for Whole Life
• Transport Package: Wood Case
• Specification: L2200*W1750**H2300mm
• Trademark: Chipbest
• Origin: China
• HS Code: 8479899990
• Production Capacity: 200 Sets Per Month

Product Description

Z-shaped Lithium Battery Automatic Stacking Machine for Electrode Cell

Device Function:
This stacking equipment is mainly used for square type lithium ion power battery cell Z shape lamination.

Refer Picture For Lithium Electric Z Shape Laminating Machine :


Workflow :
This single workstation laminating machine is suitable for square lithium ion polymer battery laminating process, using Z shape laminating method.  The diaphragm is actively unwound by the motor and introduced into the laminating platform through the tension mechanism and deviation correction mechanism.  The laminator moves the diaphragm back and forth to place the poles.  After CCD photography, the coordinate center line is taken to correct the positioning platform. After precise positioning, the platform is stacked on the laminating platform.  There are four sets of press claw mechanism cross action pressing pole piece.  After the lamination is completed, the cell diaphragm is cut off by the manipulator clamp. The cell is rotated to the hot pressing composite mechanism for hot pressing. Finally, the material is deposited by the stacking mechanism.

Laminated Mode: diaphragm → double flour negative plate → diaphragm → double flour positive plate → diaphragm → double flour negative plate →......double flour positive plate →double flour negative plate →diaphragm.

The stacking machine has the following mechanisms:  Two bin take put and storage agency, rolling mechanism, membrane tension diaphragm, diaphragm correction mechanism, are negative linear motor transfer mechanism, positive negative pole piece CCD photo fetching coordinates to correct positioning (CCD photo detection at the same time sheet size, the imperfect functions), laminated with high power servo motor from institutions, cutting mechanism, batteries, hot pressing composite diaphragm,  Cell stack storage mechanism.

Technical Parameters :

Item	Acceptance process technical parameters
Lamination Time per Unit	≤1.0-1.2S/pcs , for single workstation (According to the efficiency of the lamination process, not according to the total productivity efficiency of the whole day)
Single Cell Auxiliary Time	≤15S (big finger from lamination table to recover lamination time)
Pole Piece and Diaphragm Adjacent Accuracy	Center deviation ±0.3mm.
Diaphragm End Face Alignment Accuracy	±0.3mm (head-to-tail alignment ±0.5mm);
Adjacent Pole Piece Alignment accuracy	±0.3mm
Pole Piece Overall Alignment accuracy	±0.5mm
Lamination Layer #	can be set within the thickness adaptation range
Material Feeding	The cell is automatically placed in a fixed position
Utilization Rate	The 24-hour equipment failure rate is less than 2% (failures caused by equipment only)
Qualified Rate (except for bad incoming materials)	Over 99.2% (except for bad incoming materials)

Equipment Features :
1. Diaphragm: active unwinding; tension control; diaphragm positioning correction; diaphragm de-static; diaphragm alignment accuracy from sides:       ±0.3mm (head and tail alignment ±0.5mm); .
2. High precision: Through precise positioning process for the pole pieces, the overall lamination accuracy for each piece is guaranteed to reach ±0.5mm (alignment accuracy for adjacent pole pieces: ±0.3mm);Alignment accuracy between pole piece and diaphragm: center deviation ±0.3mm 
3. High efficiency: lamination speed can reach 1.0-1.2s/pcs (for single station, excluding auxiliary time);
4. Anti-dust protection: an anti-dust protection mechanism is installed in the material box and at a pre-positioning location;
5. Excess-cell/ Less-cell protection: less-cell detection protection; prevent excess -cell mechanism; excess cell detection mechanism, effectively        prevent excessed chips stacking into the cell;

Basic Requirements Of Equipment
1. Equipped with faults record, output statistics, key wearing parts life record tracking, key parameters function;
2. Equipment design should fully consider the convenience and simplicity of care/maintenance;
3. Detachable fixture/mold, designed to meet the needs of rapid product replacement;
4. Using motion controller industrial computer control. Compatible with upper software and MES system docking function.

Main structure Diagram & Function Introducing :
Function Introduction: 
1. Ether CAT protocol line is used to control the device. 
2.Piece taking mechanism to laminating platform and diaphragm feeding adopts full servo electronic CAM motion mode (other supplier use cylinder).

Main Composition & Description

NO.	Part Name	Quantity/Set	Description
1	Positive and negative plate clips	4	Special plug-in magazine;  Two sets of positive and negative poles each (prepare two sets), adjustable within the compatible range.
2	Pole Piece Feeding Auxiliary Mechanism	2	Ionic blower, brush, dithering mechanism anti-multi - piece, vacuum device.
3	Pole Piece Feeding Jacking Mechanism	2	Push rod manipulator up and down, optical fiber height limit Automatic stop alarm when the pole piece is used up
4	Diaphragm Tension Mechanism	1	The whole line motor controls the diaphragm and laminating platform to move left and right to form electronic CAM mechanism unwinding.
5	Diaphragm Correction System	1	Using purchased standard rectifying device to control diaphragm unwinding, ensure diaphragm stacking precision neat.
6	CCD CCD Visual Correction Secondary Positioning Mechanism	2	CCD visual photography was used to correct the secondary positioning CCD can detect pole piece incomplete, dimension, dimension coordinate positioning correction function.
7	Excess-chip Inspection	2	Anti-single and double ultrasonic detection, prevent the absorption of multiple pieces stacked into the cell.
8	Lamination Manipulator	2	Double actuator linear motor is used to drive the manipulator to grasp and put the pole piece reliably.
9	Feeding Sucker Mechanism	4	Plastic buffer rod vacuum suction nozzle + suction plate (two sets for each)
10	Lamination Table	1	The motor drives the laminating platform up and down, and the high power servo motor drives the laminating platform back and forth.
11	Robotic Gripping Module	1	Manipulator automatically realizes the transfer of the cell
12	Diaphragm Cut-off Mechanism	1	1 set of hot knife mechanism
13	Automatic Unloading	1	The battery cell automatically drops into a fixed position
14	Electrical operating system	1	Touch screen operation, with emergency stop, reset, power switch and other buttons
15	Control System	1	Electric appliances and gas channels are installed inside the equipment to save space and facilitate maintenance
16	Frame	1	Square support, color: international standard warm ash 1C/ customer provided color plate
17	Dust cover	1	Aluminum alloy plexiglass cover 1 set, with interlock switch, emergency switch
18	Dust Collection Mechanism	1	Blower vacuuming; Reservation, material box vacuuming system
19	Vacuum System	1	Built-in vacuum generator
20	Battery Cells Fixture	1	Standard with 1 set of fixture, according to the requirements of the customer
21	Tab Detect	2	CCD photography is used to detect the presence of pole lug, warping, folding Angle and other bad incoming materials
22	Pressure Detector	1	Equipment system pressure additional pressure monitoring, set the lowest pressure alarm
23	Diaphragm electrostatic discharge (ESD) treatment	2	Eliminate static electricity on diaphragm surface

Single Station Battery Laminating Machine Detailed Pictures :

Pakaging :