15-20PCS/Min Fully Automatic Meltblown Nonwoven Carbon Cloth FFP3 N95 Cup Mask Making Machine

• Customization: Available
• After-sales Service: Whole Life Free Online Support
• Automation: Automation
• Model NO.: JS-CM-NV
• Production Scope: Product Line
• Production Capacity with Valve: 10-15 PCS/Min
• Production Capacity Without Valve: 15-20 PCS/Min
• Delivery Time: 35 Days
• Option: Print Clients′ Logo
• Warranty: 1 Year
• Transmission Type: Flexible
• Automatic Production Line: Comprehensive
• Certification: CE
• Flexible Production: Intelligent Manufacturing
• Rhythm: Flow Production Line
• Transport Package: Wooden Case
• Specification: 35 CBM
• Trademark: CHIPBEST
• Origin: Dongguan, China
• HS Code: 8449009000
• Production Capacity: 10-20 PCS/Min

Product Description

                           Chipbest Fully Automatic N95 FFP3 Cup Mask Making Machine Specifications 

1.Function introduction
This equipment is used for automatic cup mask production line (typical model such as N95 mask), the whole roll of equipment feeding, multi-layer needle-punched cloth, solution spray cloth, non-woven cloth roll through hot pressing molding, overlapping cold pressing, ultrasonic welding fusion, and finally the mask cutting molding, automatic nose bridge, automatic ear band welding out of the finished product.
The production of masks is comfortable to wear, no sense of pressure, mask filtering effect is good, fit people's face shape, can be applied to medical, electronic, mining, construction and other industries. This machine adopts PLC, touch screen control, main conveyor belt adopts imported servo motor transmission, accurate transmission, stable control, adjustable speed.


2. Product characteristics
1. The whole line is fully automated, with a production speed of 15-20PCS per minute, and can be produced without shutdown during feeding.
2. Melt spray can be cold pressed; the product quality can reach FPP3 grade
3. Automatic nose bridge, accurate and beautiful position
4.The equipment is easy to maintain, modular design, can be quickly spliced, to achieve rapid production.
5. The equipment size is small, 2700×2000×1800/3500×1500×1800 mm covers an area of less convenient air transport.
6. Each module can be used separately, free combination.
7. The processing workpiece aluminum alloy hard oxygen processing, the frame adopts cast iron welding, baking paint, beautiful, solid and not rust.
8. PLC (Mitsubishi PLC) programming control, high stability, low failure rate, less noise.
9. Adopt imported servo motor, imported pneumatic components, high precision.
10. The material size is small, photoelectric detection of raw materials, avoid mistakes and reduce waste.
11. The machine adopts pulley and fixed foot, which is convenient and fast to move, strong and fixed, and does not waver.


3. Technical parameters
1. Machine size: Length×Width×Height: 7400mm×2400mm×2200mm can be split into
3300×2200×2200 and 4800×1800×2200 mm for two parts
2. Weight: Total weight 2.8T, 1.3T and 1.5T after splitting
3. Frequency :50-60 Hz, Voltage: AC 380V, 50-60Hz
4. Production efficiency: 12-20 pieces/mins
5. Power consumption: 20 KW
6. Air consumption: 35m³/min Air pressure 0.6Mpa suitable for 22 KW air compressor

4. The overall layout
Each module can be used independently and combined freely.
The equipment is easy to maintain, modular, and can be quickly spliced for production.


5.Material Technical Parameters

Material	Size	Outer diameter	weight	Note
Needle-punched cotton	220×220 mm	600 mm	175 g
Melt-blown cloth	220×220 mm	600 mm	25 g , 25 g
Non-woven fabrics	220×220 mm	600 mm	25 g, 50 g

6.Equipment maintenance
Equipment Maintenance and points for attention:
1. Keep the machine clean, prevent debris immersion
2. Handle and move carefully to avoid damage of parts caused by impact.
3. Main engine and accessories (screw, slide rail, etc.) pay attention to rust, long time should not be coated with oil.
4. Equipment for a long time, every other week should be powered on.
5. The maintenance and repair of air passage needs professional operation.