| Model |
IAR-103 |
Control |
Commercial computer |
| Heating zones qty. |
Top 10, bottom 10 |
Cooling zones qty. |
Top 3, bottom 3 |
| Heating zone length |
3900mm |
Rectifying plate |
Thick copper plate |
| Weight |
Appx.:2700Kg |
Dimension |
6305*1448*1658mm |
| Exhaust capacity |
11sm/min×2 |
Color |
Grey |
| Control system |
| Electricity supply |
3P 380V/220V 50/60HZ |
Temp. control range |
Room temp.~300ºC |
| Total power |
83KW |
Temp. control accuracy |
±1ºC(static state) |
| Start power |
38KW |
Temp. control method |
Closed loop, PID + SSR |
| Consumption power |
11KW |
PCB temperature deviation |
±1.5ºC |
| Speed control |
3 sections with 3 inverters |
Data save |
All profiles can be saved |
| Warm up time |
Apprx.30minute |
Abnormal alarm |
High, low temp. alarm |
| Conveying system |
| Rail structure |
2 segments structure |
Rail fixed method |
Front fix |
| Chain |
Stainless steel stuck-free type |
Conveying height |
900±20mm |
| PCB Max. width |
60-460mm each lane |
Conveying method |
Chain+ CBS |
| Component height |
Top/bottom 30mm |
Conveying speed |
300-2000mm |
| Conveying direction |
L to R or R to L |
Lubrication |
Automatic |
| PCB width adjust |
Automatic from recipe |
Operating system |
Win 10 |
| Max. temp. difference between preheat zone and soldering zone: 90 ºC |
| Max. temp. difference between preheat zone: 50 ºC |
| Max. temp. difference between solder zone: 50 ºC |
| Cooling system |
| Cooling method |
Forced air cooling |
| Cooling zones |
Top3, bottom 3 (960mm), after cool down by air, PCB temp. is ≤45ºC at the exit. |
| Heating features |
| Heating zones |
Top 10,bottom 10(3900mm)can meet the need of the peak lead-free technique. |
| Warm up time |
From the normal temp. to set temp, approximate 30 minutes. |
| Warm up sequence |
Warm up from two side, save the power and time |
| Profile transfer time |
<15min |
| Heating zone temp. control accuracy |
±1ºC |
| PCB temp. deviation |
±1.5ºC |
| Empty→ full load heat balance respond time |
≤20 s |
| Heating zones separately close function |
Every heating zone can be closed separately on computer. When the bottom heating zones are closed, the PCB two sides temp. different reaches max.(PCB of different material, thickness, size, the temp. difference value is different.) |
| Heating parts |
| Hot air motor |
Import anti high temperature motor,RPM:2800rpm.Adopts inverter to control, can adjust the speed of motor from 0 to 3000, stepless. Motor warranty is 5 years. |
| Heater |
The heater is specially made, with high efficiency and sensitivity, warranty time is 5 years. |
| Air lane structure |
High efficient air lane, provides abundant air |
| Exhaust system |
Forced exhaust device, ensure no escape of flux. |
| Transmission parts |
| Anti torque rail |
High strength and hardened rail, is very durable and wear resistant. |
| Rail parallelism |
±0.3mm |
| Chain stretch out length |
Standard: 5mm, the chain is anti-stuck type, solve the soldering problem of small PCB |
| C/V speed set min.unit range |
0.01m/min, 0~2m/min |
| C/V speed deviation range |
Computer close loop, within ±2% |
| Chain tension device |
Automatic adjust by spring, avoid the chain stuck due to the heating. |
| Conveying motor |
Panasonic adjustable motor |
| Chain lubrication |
The lubrication is controlled by PC, lubrication cycle and time can be set(there are three modes: fine, standard, economical. There is also manual lubrication in software) |
| Rail width-adjusting |
Independent motorized adjusting |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}